Brand / Amarr
Amarr garage door install cost in 2026
Amarr is the third-largest US residential garage door brand with roughly 14 percent market share. Labour to install an Amarr door in May 2026 runs $220 to $1,500 across the product range. The brand's strength is mid-tier residential value, with installation pricing typically $20 to $80 below comparable Clopay or Wayne Dalton specifications in competitive markets.
Amarr labour, by series
| Series | Labour low | Labour high | Notes |
|---|---|---|---|
| Heritage 1000 (9x7, non-insulated) | $200 | $320 | Builder-grade single, fast install |
| Heritage 2000 (9x7, polystyrene insulated) | $220 | $360 | Mid-tier insulated single |
| Heritage 3000 (16x7, R-13 polyurethane) | $320 | $540 | Two-person, premium insulation |
| Classica (16x7 carriage-house steel) | $340 | $580 | Decorative panel, standard install |
| Hillcrest (carriage-house overlay) | $320 | $680 | Composite wood overlay on steel |
| Vista (full-view glass-and-aluminum 16x7) | $700 | $1,200 | Three-person, glass-handling |
| Oak Summit (carriage-house wood) | $450 | $900 | Wood overlay, finish care |
2026 US national averages from Amarr-authorised dealer pricing. As of May 2026.
Section 02 / Mid-tier value
Why Amarr is the value pick in the big-three residential brands
Amarr's residential product range covers the same use cases as Clopay and Wayne Dalton with slightly less aggressive marketing and slightly lower authorised-dealer margin requirements. The result is that Amarr install pricing is consistently $20 to $80 below comparable Clopay or Wayne Dalton specifications in competitive markets, particularly in the Southeast and Mountain West where Amarr's dealer density is highest.
The product is comparable. Heritage 2000 is engineered to similar standards as Clopay Classic Steel 4053 and Wayne Dalton Model 8000. The panel weight, the torsion-spring spec, the hardware kit, the install workflow are all conventional steel residential. Where Amarr saves money is at the product-management and marketing layer, not the manufacturing layer.
For homeowners who are comparing quotes on a like-for-like basis, Amarr is worth including in your bid set. The labour saving over Clopay or Wayne Dalton is small but real, and the product quality is genuinely comparable. The authorised-dealer network is the limiting factor: in markets where Amarr has thin dealer coverage, the install pricing benefit may disappear because the installer has to source through a regional distributor rather than direct.
See our Clopay install cost page and our Wayne Dalton install cost page for the comparable price points.
Section 03 / Classica versus Hillcrest
Amarr's carriage-house options on install
Amarr offers two distinct carriage-house product paths. Classica is steel-only with decorative panel stamping that gives the carriage look from the street. The install workflow is essentially Heritage with the decorative panel. Labour runs $340 to $580 on a 16x7. The door-price premium over Heritage is $400 to $900.
Hillcrest puts a composite wood overlay on a steel core, similar in concept to Clopay Coachman or Wayne Dalton Semper Fi. The wood-grain look is closer to a true wood carriage door, and the install workflow is essentially Heritage with extra care for the overlay finish. Labour runs $320 to $680 on a 16x7 depending on the specific overlay treatment.
For homeowners who want the carriage look but do not want the maintenance burden of a true wood door, either Classica or Hillcrest is the right answer. The choice between the two is essentially aesthetic: Classica is more architectural, Hillcrest is more rustic. Both install cleanly on conventional residential hardware.
Oak Summit is the closest Amarr gets to a true premium wood carriage door, with a real wood overlay (rather than composite) on a steel core. Labour is higher at $450 to $900 because the wood finish requires more careful staging. For a deeper comparison of wood-overlay versus solid wood doors, see our wood install cost page.
Section 04 / Regional strength
Where Amarr install is most competitive
Amarr's authorised-dealer network is densest in the Southeast (North Carolina, Georgia, South Carolina, Tennessee), Florida outside the Miami metro, Texas outside the largest metros, and the Mountain West (Colorado, Utah, Arizona). In these markets, Amarr install pricing is reliably competitive with Clopay and Wayne Dalton.
In the Northeast (New York, Massachusetts, Connecticut), Amarr's dealer density is thinner and the install pricing benefit shrinks because the installers may need to source product through a regional distributor with a margin layer in between. In the Pacific Northwest (Washington, Oregon), Garaga (a Canadian premium brand) takes the mid-tier market share that Amarr holds in the Southeast.
For homeowners in Amarr-strong markets, getting at least one Amarr authorised-dealer quote in your bid set is worth the time. The product quality is comparable to the big two, the labour pricing is slightly more competitive, and the warranty terms are similar.